Wenger Diva 185E549 User Instructions Download Page 1

User Instructions

Diva

®

 Air Transporter

©Wenger Corporation 2021 

Printed in USA 2021-08 

Part #185A462-02

Wenger Corporation,

 555 Park Drive, P.O. Box 448, Owatonna, Minnesota 55060-0448

Questions? Call.....USA: (800) 4WENGER (493-6437) • Worldwide: +1-507-455-4100 • wengercorp.com

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

General  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Manufacturer  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

European Representative  . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Name and Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Machine Description  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

EC Declaration of Conformity  . . . . . . . . . . . . . . . . . . . . . . . . 3

Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Warranty  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Dimensions  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Stage Load Specifications

  . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Floor Level Specifications

  . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Required Working Environment   . . . . . . . . . . . . . . . . . . . . . . 5

Main Electrical Power Supply  . . . . . . . . . . . . . . . . . . . . . . . . 5

Ground Connection  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Ambient Light Levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Control Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Tower Set Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Power Failure   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Abnormal Uses  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Replacement Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Training . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Air Beam Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Check Size of the Air Beam   . . . . . . . . . . . . . . . . . . . . . . . . . 12

Remove Current Air Beam   . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Attach New Air Beam   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Contents

Note:

  Please read and understand these instructions before using.

Note:

  If you need additional information, contact Wenger Corporation using the information below.

Visit the Diva Acoustical Shell web page at wengercorp.com for more information.

Summary of Contents for Diva 185E549

















Reviews: