Wenger Cupholder Assembly Instructions Download Page 1

Page: 1 / 2

Assembly Instructions

Cupholder Accessory

for Flex

TechBridge

©Wenger Corporation 2019

Printed in USA 2019-10

Part #236A186-02

Wenger Corporation,

555 Park Drive, P.O. Box 448, Owatonna, Minnesota 55060-0448

Questions? Call.....USA: (800) 4WENGER (493-6437) • Worldwide: +1-507-455-4100 • wengercorp.com

Parts List

Cupholder

Accessory

Note:

Please read and understand these instructions before assembling.

Note:

If you need additional information, contact Wenger Corporation using the information below.

Basic Instructions to be used with the Cupholder Accessory for Flex

TechBridge only!

For othe component information, refer to the Flex TechBridge Owner's Manual 236A153.

Item Qty Description

Cupholder

Nylon Lock Nut, #10-24

Bridge Clip

Flat Washer, 0.188 ID x 0.734 OD”

Machine Screw, #10-24 x 5/8”

Summary of Contents for Cupholder

Page 1: ...ory Note Please read and understand these instructions before assembling Note If you need additional information contact Wenger Corporation using the information below Basic Instructions to be used wi...

Page 2: ...tach the assembled cupholder to the bridge extrusion by inserting the short side of the bridge clip into the outside groove Press down to snap the long side of the bridge clip into place 3 To repositi...