Wenger 145V006 Assembly Instructions Manual Download Page 1

Assembly Instructions

Wardrobe Cabinet

Note:

Please read and understand these instructions before assembling the parts.

Note:

Remove all items from the shipping cartons and arrange them in a convenient location. 

Refer to the illustrations on the following pages. 

If you need additional information, contact Wenger Corporation using the information below.

C

ONTENTS

©Wenger Corporation 2014

Printed in USA 08/14

Part #145V345-04

Wenger Corporation,

555 Park Drive, P.O. Box 448, Owatonna, Minnesota 55060-0448

Questions? Call.....USA: 1-800-4WENGER (493-6437) • Worldwide: 1-507-455-4100 • www.wengercorp.com

Important User Information . . . . . . . . . . . . . . . . . . . . . . . . . . .2

General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Manufacturer  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Intended Use  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Warranty  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Before You Begin  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Required Tools  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Fastener Parts List  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Leveling the Cabinets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Securing the Cabinet(s) to the Wall  . . . . . . . . . . . . . . . . . . . .5

Installing the Shelves  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

File Drawer Removal  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Summary of Contents for 145V006









Reviews: