background image

WARNING!

 Never perform maintenance operations while the generator is running. Before maintaining or 

servicing the generator, turn OFF the generator, disconnect all devices and allow the generator to cool down. 

NOTE: 

Failure to properly maintain the generator will void the warranty.

RECOMMENDED MAINTENANCE SCHEDULE

Proper routine maintenance of the generator will help prolong the life of the machine. Please perform maintenance 

checks and operations according to the maintenance schedule below, Table 4. If there are any questions about the 

maintenance procedures listed in this manual, please contact customer service at 

1-847-429-9263

 (M-F 8-5 CST), 

or email 

[email protected]

.

IMPORTANT GENERATOR MAINTENANCE TIPS:

•  Drain your carburetor after each use and before storage to prevent it from clogging.
•  Do not store the generator with fuel inside the tank for more than 2 months - the fuel will go bad.
•  Run the generator for 20 to 30 minutes every month to maximize its lifespan. 

Recommended

Maintenance Schedule

Every 8 

Hours or 

Daily

Every 25 

Hours

Every 3 

Months or 

50 Hours

Every 6 

Months or 

100 Hours

Before 

Storage

As

Necessary

Engine Oil

Check Level

X

Replace

X*

X

Air Filter

Check

X*

Clean

X*

Spark Plug

Check/Clean/

Regap

X

Change

X

X

Fuel

Check Level

X

Drain

X

X

Carburetor

Drain

X

X

Spark 

Arrestor

Check/Clean

X

Table 4 - Recommended Maintenance Schedule

* Clean/change more often under dusty conditions 

or operating under heavy load.

MAINTENANCE

26

Summary of Contents for DF430X













































Reviews: