2
Made in Germany
S afet y i nstruc ti ons
1.
Installation and the first start of the system should only be carried out by qualified
technicians. When installed in a vehicle, the installation specifications of the vehicle
manufacturer apply. Fasten the unit only in the interior of the vehicle.
2.
The fastening material included in delivery is recommended for proper installation.
3.
The use of rechargeable batteries not explicitly listed in this document may lead to fire.
4.
The contacts of the product should be cleaned at regular intervals with a dry cloth.
Under no circumstances should you use water or other liquids.
S cope of del i very
The following items are included in the scope of delivery:
1.
Passiv-Charger WTC680
1.
Holding bracket for WTC680
2.
Passive accessory set
S tart of the sy stem
Passive accessory set
1.
Connect the strands (1) of the DC cable provided to mains power. Be sure that the
approved working voltage and polarity are used.
2.
Mount the included holding bracket in a suitable place in the vehicle. Mounting screws
for the holding bracket are not included in the scope of delivery and must be purchased
separately.
3.
Fasten the charger to the holding bracket using the four knurled screws (4).
4.
Insert the hollow plug (3) of the DC cable into socket (C) of the charger.
5.
Secure the connection using the cable tie (5)
Instructions
: The DC cable includes a fuse holder (2) whose fuse will be destroyed in case
of excess current. You can find information about replacement fuses in the technical data.
