26
3-3 Tone
The setting page is used to set up the tone to be generated.
When FXS port
is in talk mode and received the “bye” signal from IP side, or remote
device dropped call while FXS port analog phone was still in OFF Hook ,
this FXS port will send busy tone to analog phone interface.
Figure 3-3 Tone setting
Please use Country Template to select the country profile which will be applied.
Click “
Use
” icon to load those country tone parameters to system and change
if it is necessary.
For those countries are not showed in the list, please select
a close country’s tone parameters and modify it to match your country.
