20
Figure 2-5 Debug setting
Parameter Description:
SYSLOG: Enable or disable to send system information to SYSLOGD
server or not.
Check for start from Any Time: Always Send: Always send syslog or
only during a specified time range.
Syslog Start (YYYY/MM/DD HH:MM): Always Send: Always send
syslog or only during a specified time range.
Syslog Stop (YYYY/MM/DD HH:MM): The syslog stop sending time.
Syslog Server: Syslog server IP address.
Syslog Port: syslog server service port (default is 514)
DSP Debug: Enable or disable to send DSP information to capture log.
DSP Capture server: Syslog capture server IP address.
DSP Capture port: syslog capture server service port (default is
52000).
2-6 Event Notice
WellGate 3232s will send Syslog Event Notice when it has the following cases:
1.
Register failed or re-registered.
2.
Ethernet reconnected.
3.
System started.
Figure 2-6 Event notice setting
