Welltech Technology Co., Ltd.
28
Figure 3.1.1-2 Line Setting
(Details setting of built-in 4-port FXO Lines)
Table
3.1.1-2 Line Setting
Label
Description
Line Number
Assign one number to this Line. This number is also the
registration name on ePBX40 IP-PBX.
Dial Plan
Define the dialing plan for each Line has come in to ePBX40. It
specifies the location of the instruction used to control what extension
is allowed to do, and what to do with incoming calls for this extension.
In this field, you can Choose 5 dial levels for Extension, including
[ext-only], [ext+R1], [ext+R12], [ext+R123], [ext+allroutes]. You
can define an “Outgoing call” record, to a certain Route Level, as R1,
R2…, etc.
1. [ext-only] means this FXO Line can only call to Extensions.
2. [ext+R1] means this FXO Line with such Dial Plan can call to
Extension and Route Level with R1.
3. [ext+R12] means this FXO Line with such Dial Plan can call to
Extension and Route Level with R1 and R2.
4. [ext+R123] means this FXO Line with such Dial Plan can call to
Extension and Route Level with R1, R2 and R3.
5.[ext+allroutes] means this FXO Line with such Dial Plan can call to
Extension and Route Level with R1, R2, R3 and R4(allroutes).
Note:
For more information about Route Level, please refer to the user
manual:
Chapter 3.2.7 Outgoing Routing.
BLF
Enable BLF (Busy Line Field) function for this extension. In general
