background image

12

12

Specifications

Battery capacity

Li-ion 10.8V, 2500 mAh

Charging voltage and current

5V 

  2A  

Max. power consumption

35W Max.

Amplitude

10mm

Speed modes

Level 1: 1800RPM, Level 2: 2000RPM, 
Level 3: 2300RPM

Temperature value

Heating: Level 1: 35°C, Level 2: 40°C, Level 3: 45°C
Cooling: Level 1: 20°C, Level 2: 15°C, Level 3: 10°C

Charging time 

5-6 hours 

Working time

1.5-4 hours (working time varies on selected massage mode 
and intensity level)

Auto timer

15 minutes

Weight (device only)

625 g

Dimensions (W x H x D) (mm)

156 x 151 x 59

Responsible disposal

WARNING!

 

This product contains a rechargeable lithium-ion battery. Never throw 

the appliance into a fire and do not subject it to high temperatures. There is a risk 
of explosion! 
At the end of its working life, do not throw this appliance out with your household 
rubbish. Electrical and electronic products contain substances that can have 
a detrimental effect on the environment and human health if disposed of 
inappropriately. 
Cut the power cord of the battery charger and remove the lithium-ion battery pack 
from the appliance before disposal. Dispose of the appliance and the battery pack 
responsibly, observing any local regulations regarding the disposal of consumer 
goods and batteries. Contact your local authorities for advice on battery disposal 
and recycling facilities for electrical consumer goods.

For Technical and Warranty Support 
 

1300 886 649 

 tempo.org/support
 

Distributed by Tempo (Aust) Pty Ltd,  

 

 

 

PO Box132, Frenchs Forest NSW 1640

Summary of Contents for FE-5856

















Reviews: