USER’S MANUAL
STERILIZATION LAMP WITH UV LIGHT
Model: LAMP-UV-VR01-WL
Thank you for choosing
WELL
. Please read carefully the following instructions and keep them within reach.
INTRODUCTION:
The Ultraviolet Sterilisation lamp is used to kill Bacteria, Viruses, Mites and to Eliminate odor, Remove smoke by UVC. The UV
disinfection lamp is more effective than liquid disinfectant, can kill 99% of bacteria and viruses (Like Cyanobacteria,
Staphylococcus,Candida albicans, E.coli, Salmonella Flu Virus). It use powerful 36Watt UVC Quartz lamp, effectively covers up to
60 Square meter. It can make 360° sterilization. Only for indoor use, recommended for disinfection apartments, houses, hotels,
restaurants, schools, kindergarden, etc.
SPECIFICATIONS:
Voltage: 220-240V, 50-60Hz
Rated Power: 38W
UVC: 185-253NM
Lamp life time: 6000 h
Timer: 30 min
Delay function: 10 sec.
Coverage area: 60 m²
WARNING!
The sterilization lamp emits UV-C radiation, which can be harmful for skin and eyes. During the lamp is
working, human and animals must get out from the place which is going to be disinfected! After the
sterilization is advised to ventilate the place for 20-30 minutes.
OPERATING INSTRUCTION AND WARNINGS:
1.
Read carefully the instructions before start using the product.
2.
In order to avoid any damage of the lamp, it’s is advised to transport it in its own packing.
3.
Keep it away from water, flammable sources, places which can be reach by children.
4.
Place it in Secure environment, and no risk of falling.
5.
Check the local voltage before to connect the product to the main power. Plug in the appliance under normal input voltage,
please ensure the power is off before plug in the appliance. Press the touch switch button, the lamp will delay 10 seconds
and emit a notify sound before start . Due to the built in timer, after 30 minutes will automatically turn off. The lamp also
can be shut down by pressing the switch button, or by pulling out the plug to cut the
power supply.
6.
Peoples and animals should immediate leave the space once the switch button was pressed ON.
