7
2.3.4
Setting SWING
1.
Press
AHEAD
and
BACK
buttons together. De
actual set
SWING
(difference in temperature
between on and off mode of thermostat) will
appear in the
SET TEMP
window, together with
the mention
SWING
on the display.
2.
Press
UP/DOWN
to change the
SWING.
3.
Press
SET
to confirm
2.4
Program operation of remote control
The transmitter has a factory built-in standard program. Each day has been broken into four periods and each
period has its own starting time and temperature. A chart of the built-in programs is pictured below
You may change any of the factory settings by following the procedures below. Should you wish to return to
the factory program, follow the procedure under heading 2.4.3 Program cancellation.
2.4.1.
Programming day/period of day/temperature
CUSTOM PROGRAM:
DAY
Morning
Day
Evening
Night
Hour
Temp
Hour
Temp
Hour
Temp
Hour
Temp
SU
MO
TU
WE
TH
FR
SAT
You may change the built-in time and temperature programs to suit your personal schedule (see 2.4. week
programming). Each day is divided into four periods: MORNING, DAY, EVENING and NIGHT. A blank
programming chart is provided above to record your customized time and temperature settings If desired, you
may change a single day or all seven days that have the built-in factory program. To change one or all seven
days, complete the following steps.
NOTE: Before modifying the standard program, be sure that day and hour are correctly set.
DAY
PERIOD
hour / temperature
Every day of the week
MORN
6:00 am
21°C
DAY
8:30 am
16°C
EVE
3:00 pm
21°C
NIGHT
11:00 pm
18°C
