Welch Allyn CP 200 Directions For Use Manual Download Page 18 | Manualshive

Page: 18 / 92

Welch Allyn CP 200 Directions For Use Manual Download Page 18

14

Chapter 2 Reviewing the Spirometry Settings

Welch Allyn CP 200 Spirometry Option

Select FVC
Reversibility Formula

Reversibility is the percentage difference between pre-test and post-test data for FVC
testing. This measurement indicates the effect of medication on lung function. Reversibility
applies to each parameter separately.

To determine the way in which reversibility is calculated, choose from these options:

•

((Post-Pre)/Pre)*100

•

(Post/Pre)*100

•

((Post-Pre)/Predictive)*100

Select FEV1%
Formula

The FEV1% formula determines the calculation method for a test’s (not an effort’s) overall
FEV1% value, which affects the automatic interpretation. The variable part of this formula
is the denominator. Both the numerator and the denominator represent

best effort

values.

To determine the way in which FEV1% is calculated, choose from these options:

•

FVC

(FEV1% = FEV1/FVC)

•

FIVC

(FEV1% = FEV1/FIVC)

•

FEV6

(FEV1% = FEV1/FEV6)

•

Max (FVC, FIVC, SVC)

(FEV1% = FEV1/FVC or FIVC or SVC, whichever is largest)

Enable Predictive
Points

Yes or no. If yes, predictive points display and print. Predictive points may be enabled with
or without the predictive curve. For details, see

“predictive points”

Enable Predictive
Curve

Yes or no. If yes, a curve displays and prints along the predictive points. When the curve is
enabled, the points are automatically also enabled.

Enable ATS Interp.
Results

Yes or no. If yes, ATS interpretative results are included in the test record. For details, see

“ATS interpretive results”

Enable Composite
Norm Values

Yes or no. If yes, any parameters that are not supported in the primary (selected) norm are
given predictive values from alternative (composite) norm sources.

If set to no, only the primary norm’s values are used, no composite values. On the screen
and in reports, any unsupported parameters appear without predictive values.

For details, see

“About Race Adjustment”

Setting

Description (continued)

«
...
16
17
18
19
20
...
»

Summary of Contents for CP 200





























































































Reviews:

No comments