Welch Allyn Connex Vital Signs Monitor 6000 Series, Directions For Use Manual

Page: 122 / 143

2. Touch the
Parameters
tab.
3. Touch the
Manual
tab.
4. Select up to four parameters and associated units of measure for display in the Manual
Parameters frame.
If SureTempPlus is connected to the monitor, the
Temperature
parameter is not available
here or in the Manual Parameters frame.
5. Do one of the following:
• To continue in the Advanced Settings, touch another tab.
• To exit the Advanced Settings and return to the Home tab, touch
Exit
.
Data management
Specify patient ID settings
Patient identification appears on the Home tab in the Patient frame, and it is listed in various tabs,
such as the Patient tab and the Review tab.
1. Access the Advanced Settings.
a. Touch the
Settings
tab.
b. Touch the Advanced tab.
c. Enter the
Advanced settings code
.
d. Touch
OK
.
The General tab appears.
2. Touch the
Data Management
tab.
3. Touch the
Patient IDs
tab.
4. Specify settings.
Setting Action/Description
Name format Select a format for all displayed patient names:
Full name
or
Abbreviation
.
Primary label Select the primary identification label for all
displayed patients.
116 Advanced settings Welch Allyn Vital Signs Monitor 6000 Series™