Welch Allyn Connex IWS, Directions For Use Manual

Page: 56 / 266

Connect the blood pressure (NIBP) hose
1. Align the hose connector with the hose connector port on the bottom of the monitor.
2. Insert the hose connector, pressing firmly until it clicks into place.
3. Attach a blood pressure cuff to the tubing (see the cuff manufacturer's directions for
use), then store the cuff in the accessory bin.
Set up the physical assessment instrument handles and
specula dispenser
1. Attach the specula dispenser. Ensure that the keyhole locking slots on the back of
the dispenser engage the locking screws on the wall system, then push down firmly.
2. Remove cardboard securing instrument handles.
50 Setup Welch Allyn Connex
®
Devices