131
eikon e1s
Service and repair guide
(1) = Thermocouple connector
(2) = Personality Module
Fitting the SRB
•
Follow the steps in the reverse order to fit the SRB.
•
Reconnect all electric connections to the SRB.
in
Section 3G.
Ensure the thermocouple negative (-) connection (white) and positive (+) connection (green) are fitted the correct way
round or the oven temperature readings will be wrong.
Note: Refit the Personality Module (PM) removed from the old SRB to the new SRB.
Reason: Replacement QTS / SRB units come WITHOUT Personality Modules as the PMs store individual settings saved by the
user
.
If the electric connections have not been restored properly this may lead to malfunction/damage of the oven.
Replacing the touchscreen overlay
Requirements and tools
Check that the following requirements have been met:
•
The appliance has been disconnected from the power supply and protective measures have been taken to ensure
the power cannot be switched on again.
•
The appliance is cool.
•
The top and side panels of the casing of the appliance have been removed.
•
The high voltage capacitors are discharged before commencing work.
•
Anti-static precautions have been taken.
Tools required:
•
Flat headed screw driver
1. The touch screen overlay surrounds the easyTOUCH
®
screen providing easy-
to-clean protection from electrical connections. Should it fail, it can be
removed by prising away from the front of the appliance with a flat headed
screwdriver.
2. The adhesive should be removed from the appliance using an alcohol based cleaner before the replacement is
applied.
Summary of Contents for Merrychef eikon e1s
Page 11: ...11 eikon e1s Service and repair guide Section 1 Safety ...
Page 43: ...43 eikon e1s Service and repair guide Section 2 Operations and Installation ...
Page 82: ...82 eikon e1s Service and repair guide Section 3 Service and Repair ...
Page 147: ...147 eikon e1s Service and Repair Guide Circuit diagrams ...
