Welbilt Manitowoc U65 Installation, Use & Care Manual Download Page 8

General Information

Section 1

1-2

Part Number 040006019 07/18

Owner Warranty Registration Card

GENERAL

The packet containing this manual also includes 
warranty information. Warranty coverage begins the day 
your new ice machine is installed.

If you do not return your OWNER WARRANTY 
REGISTRATION CARD, Welbilt will use the date of sale 
to the Welbilt Distributor as the first day of warranty 
coverage for your new ice machine.

COMMERCIAL WARRANTY COVERAGE
General

The following Warranty outline is provided for your 
convenience. For a detailed explanation, read the 
warranty bond shipped with each product.

Contact your local Welbilt representative or Welbilt Inc. if 
you need further warranty information.

Parts

Welbilt warrants the ice machine against defects in 
materials and workmanship, under normal use and 
service for three (3) years from the date of original 
installation.

Labor

Labor required to repair or replace defective 
components is covered for there (3) years from the date 
of original installation.

Exclusions

The following items are not included in the ice machine’s 
warranty coverage:

1. Normal maintenance, adjustments and cleaning as 

outlined in this manual.

2. Repairs due to unauthorized modifications to the ice 

machine or use of non-standard parts without prior 
written approval from Welbilt Inc.

3. Damage caused by improper installation of the ice 

machine, electrical supply, water supply or drainage, 
or damage caused by floods, storms, or other acts of 
God.

4. Premium labor rates due to holidays, overtime, etc.; 

travel time; flat rate service call charges; mileage 
and miscellaneous tools and material charges not 
listed on the payment schedule. Additional labor 
charges resulting from the inaccessibility of 
equipment are also excluded.

5. Parts or assemblies subjected to misuse, abuse, 

neglect or accidents.

6. Damage or problems caused by installation, 

cleaning and/or maintenance procedures 
inconsistent with the technical instructions provided 
in this manual.

AUTHORIZED WARRANTY SERVICE

To comply with the provisions of the warranty, a 
refrigeration service company, qualified and authorized 
by your Welbilt distributor, or a Contracted Service 
Representative must perform the warranty repair.

NOTE: If the dealer you purchased the ice machine from 
is not authorized to perform warranty service, contact 
your Welbilt distributor or Welbilt Inc. for the name of the 
nearest authorized service representative.

SERVICE CALLS

Normal maintenance, adjustments and cleaning as 
outlined in this manual are not covered by the warranty. 
If you have followed the procedures listed in this manual, 
and the ice machine still does not perform properly, call 
your authorized service company.

Important

Complete  and  mail  the  OWNER  WARRANTY
REGISTRATION  CARD  as  soon  as  possible  to
validate the installation date.

Summary of Contents for Manitowoc U65



























Reviews: