Welbilt Manitowoc RCU1075, Technician'S Handbook, Page: 46 / 288

46 Part Number 000007661 Rev02 02/20
RF0644/RF0650/RF1200/RFS1200/RF2300/RFS2300
Self-Contained Air-Cooled
When the toggle switch is placed in the ON position the
following controls must be in the closed position before
the ice machine will start:
A. Bin Thermostat
B. High Pressure Cut-out Switch
C. Ice Chute Safety Switch
D. Low Pressure Switch
E. Low Water Level Switch
Placing the toggle switch in the ON position starts the
gear motor. After the rotation speed sensor verifies
correct rotation the time delay ends¹ and the compressor
starts. The ice machine will continue to make ice until ice
contacts the bin thermostat. The ice machine remains off
until ice no longer contacts the bin thermostat.
¹ 10 minute delay for models manufactured before 12/18
and an 8 minute delay on models manufactured after
11/18.