Welbilt Convotherm OES 6.10 Mini, Operating Manual

Page: 283 / 359

7.4 Day-to-Day Rethermalization
For your safety when working with/on the combi oven
Before starting work, read and understand the rules, risks, and hazards specified in Safely Using the
Unit on page 109 and follow all the corresponding instructions without exception.
Prerequisites
Check whether the following prerequisites are met:
■
The combi oven must have been properly cleaned.
■
The air distributors must be in place.
■
The sliding cover must be covering the USB port.
■
If the combi oven is on top of an open equipment stand: There must not be any food inside the
stand.
■
You must have already read and understood how to perform the work described in 'How to Do it
Right'.
Rethermalization with pre-heating
If the combi oven is still cold, follow the steps below when rethermalizing food:
Step Procedure Button
1
Set up the rethermalization program you want or open it in
the Cookbook.
Result:
A rethermalization program will be available on the 'Re‐
thermalization' page.
or
2
Start the rethermalization program.
Result:
The combi oven will start its pre-heating sequence.
3
Place the food inside the oven as soon as the pre-heating
sequence is done and you are prompted to do so.
4
Close the unit door.
Result:
■
The rethermalization program will run and the remaining
rethermalization time will be displayed on the page's
header.
■
As soon as the rethermalization program is done, the unit
will make a sound to let you know.
5
Open the unit door and remove the rethermalized product.
7 Cooking and Rethermalizing
Operating Manual 102