Welbilt Convotherm OES 6.10 Mini Operating Manual Download Page 118

Page: 118 / 359

8.5 Removing and installing the suction panel

For your safety when working with/on the combi oven

Before starting work, read and understand the rules, risks, and hazards specified in Safely Using the

Unit on page 112 and follow all the corresponding instructions without exception.

Prerequisites

Check whether the following prerequisites are met:

■

The rack must have been removed.

Required tools

You will need the following tools:

■

A suitable tool, e.g., a wrench for releasing the latches

Removing the suction panel

Follow the steps below to remove the suction panel:

Step

Procedure

Figure

Use a tool (a screwdriver, for example) to release the

latches on the left (1) and right (1).

Push the suction panel upwards and remove it (2).

Installing the suction panel

Follow the steps below to install the suction panel:

Step

Procedure

Figure

Follow the same steps used to remove the suction pan‐

el, but in opposite order.

Keep in mind that the pins on the bottom need to en‐

gage the suction panel.

8 How to do it right

Operating Manual

118

Summary of Contents for Convotherm OES 6.10 Mini








































































































































































































































































































































































Search results

Summary of Contents for Convotherm OES 6.10 Mini

Reviews:

Related manuals for Convotherm OES 6.10 Mini

Brands by name

Popular brands

Welbilt Convotherm OES 6.10 Mini, Operating Manual

Search results

Summary of Contents for Convotherm OES 6.10 Mini

Reviews:

Related manuals for Convotherm OES 6.10 Mini

Brands by name

Popular brands