4.2 Operating principles and instructions for cooking
4.2.1 Turning the combi oven on and off
For your safety when using the combi oven
Before starting work, it is essential that you familiarize yourself with the rules and hazard warnings
specified in the chapter 'For your safety on page 13' and in this instruction manual, and follow the in‐
structions given there.
Basic rules for safe operation
If it is known or evident that the combi oven has been moved after installation without authorization
(whether intentionally or unintentionally), the appliance must not be put back into service until all the
following requirements have been met:
■
The appliance and fittings or accessories being used show no signs of damage.
■
The installed electrical power cables, water supply pipes and pipes for wastewater and cleaning
products show no signs of damage, are fixed securely, are not leaking from any point and appear
safe and in working order on visual inspection.
■
The 'Requirements relating to the operating condition of the combi oven' on page 14 are met.
■
The 'Requirements relating to the operating environment of the combi oven' are met.
■
All warning signs are in their designated position.
Rules for safe operation of the appliance
To avoid hazards, the following rules must be observed during operation:
■
Air vent and ventilation port on the top of the appliance are not covered, adjusted or blocked.
■
The racks must be fitted and attached securely.
■
The food containers must be inserted correctly in accordance with the regulations specified in 'Po‐
sitioning the cooking containers' on page 27.
■
The suction panel must be secured properly in place.
Switching on the combi oven
1.
Switch on the combi oven.
2.
Check that the oven light comes on while the appliance is
running the self-diagnostics test.
3.
Wait until the software is ready for use.
4 Cooking procedures
User manual
29
