7.
24
19
18
26
27
25
15
21
19
20
16
17
23
Cle
ve
land
DIG
ITA
L WA
TER
M
ET
ER
EM
ER
G
EN
C
Y
ST
O
P
10
2
4
5
3
1
11
12
8
13
9
6
7
ITEM #
DESCRIPTION
FUNCTION
1
MAIN POWER SWITCH
Power switch for unit.
2.
MIX/LIFT SWITCH
Sets hydraulics to mix or lift mode.
3.
UP/DOWN SWITCH
When unit is in lift mode, mixer bridge can be raised or lowered with this switch.
4.
MIXER SPEED CONTROL
Controls speed of agitators and mixer bridge lift.
5.
EMERGENCY STOP BUTTON
Stops hydraulic system (agitators and mixer bridge lift).
6.
HEAT/COOL SWITCH
Switches left hand kettle from heating to cooling.
7.
HEAT/COOL SWITCH
Switches right hand kettle from heating to cooling.
8.
ACTIVE/BYPASS SWITCH
Switch to activate or bypass (manual operation) the controller.
9.
TEMPERATURE CONTROLLER
Digital temperature control and indicator.
10.
WATER METER POWER SWITCH
Power switch for water meter.
11.
WATER METER START SWITCH
Starts water flow to kettle.
12.
WATER METER INTERRUPT SWITCH
Interrupts flow without resetting water meter.
13.
WATER METER CONTROL
Display and settings for water meter.
15.
MIXER BRIDGE
Encloses agitator motors.
16.
MAIN AGITATOR ARM
Provides most of the product movement.
17.
SECONDARY AGITATOR ARM
Provides reverse agitation and product lift in kettle.
18.
SECONDARY SPEED CONTROL KNOB
Controls speed of secondary agitator arm.
19.
FAUCET SPOUT
Delivers water to the kettle.
20.
HOT WATER VALVE
Turns on hot water.
21.
COLD WATER VALVE
Turns on cold water.
22.
VACUUM/PRESSURE GAUGE
Indicates steam pressure in PSI inside steam jacket as well as
vacuum in inches of mercury.
23.
POWER TILT CONTROL SWITCH
Used for tilting the kettle up or down. Replaced by hand tilt wheel on manual tilt units.
24
DRAW OFF VALVE
Discharge valve for product in the kettle.
25.
HEAT INDICATOR LIGHT (GREEN)
When lit, indicates that the kettle burner is on. Cycles ON-OFF with elements.
26.
SOLID STATE TEMPERATURE
This control allows the operator to adjust the kettle temperature in increments
CONTROL KNOB
from 1 (Min.) to 10 (Max.). (see Temperature Range Chart).
27.
LOW WATER INDICATOR LIGHT
When lit, indicates that the kettle is low on water and will not operate in this
(Red) condition. This will also light when the kettle is tilted.
OPERATING CONTROLS AND INDICATORS
OPERATING INSTRUCTIONS
WARNING
If for any reason this unit is not
functioning correctly DO NOT
OPERATE. Contact your
authorized service agent.
!
