5.3 General Operator-Aided Cleaning Process Instructions
5.3.1 How to Semi-Automatically Clean the Oven Cavity
For your safety when working with/on the combi oven
Before starting work, read and understand the rules, risks, and hazards specified in the 'For Your Safety on page 17' section
and in these instructions and follow all the corresponding instructions without exception.
Procedures that you must be familiar with
You will need to be familiar with the following steps:
■
Safely Opening and Closing the Unit Door
41
■
Release the suction panel and lock it back in place
86
■
Emptying the Loading Trolley's Condensate Collecting Tray
91
Prerequisites
■
You must be familiar with how to use the software to such an extent that you will be able to access and start the various
cleaning profiles, please refer to the combi oven's operating instructions.
■
All food must have been taken out from the oven cavity. There must not be any foreign objects inside the oven cavity.
■
All bakeware, sheet pans, and shelf grills, as well as any other accessories, must have been taken out from the oven
cavity.
■
The oven cavity drain must be clear. It must not be clogged or blocked by any residues. The strainer on the oven drain
must be in place.
■
The condensate collecting tray on the loading trolley must be empty.
■
The empty loading trolley must be inside the oven cavity.
■
The unit door's inner glass door must be properly locked in place.
■
The suction panel is properly locked in place.
■
The unit door must be closed.
■
The recoil hand shower (optional) must have been flushed.
■
How to Semi-Automatically Clean the Oven Cavity
1.
Open the cleaning profile and start the cleaning sequence.
2.
Wait for the soaking phase to be done (approx. 10 minutes).
3.
Once the soaking phase is done, the unit will make an acoustic signal
to let you know.
You will be prompted to spray cleaning agent inside.
4.
Open the unit door
5.
Remove the loading trolley from the oven cavity.
5 How to Clean the Combi Oven
Operating Manual
78