manualshive.com logo in svg

Wel-Bilt 151604, Operating Instructions, Page: 1 / 4

Share
Download
Wel-Bilt 151604 Operating Instructions Download Page 1

ALWAYS WEAR EYE, FACE & EAR PROTECTION

Spindle Lock

Quick Change
Guard

On-Off Switch

Brush

4in. ANGLE GRINDER

OPERATING INSTRUCTIONS

SPECIFICATIONS – ITEM# 151604

2-Position
Handle

Disc

Disc Diameter:

4in.

Disc Bore Diameter:

5/8in.

No Load Speed:

11,000 max. RPM 

Input Power:

500W

Distributed by Northern Tool & Equipment Co., Inc.       Burnsville, MN 55306-6936       NorthenTool.com
Made in China

Summary of Contents for 151604

Page 1: ...rush 4in ANGLE GRINDER OPERATING INSTRUCTIONS SPECIFICATIONS ITEM 151604 2 Position Handle Disc Disc Diameter 4in Disc Bore Diameter 5 8in No Load Speed 11 000 max RPM Input Power 500W Distributed by Northern Tool Equipment Co Inc Burnsville MN 55306 6936 NorthenTool com Made in China ...

Page 2: ...heck for alignment of moving parts binding of moving parts breakage of parts and any other conditions which may affect or restrict the tool s operation A guard or other part that that is damaged should be repaired or replaced by an authorised service agent Have defective switches replaced immediately The tool should not be exposed to excessive humidity or be operated in areas with explosive or cor...

Page 3: ...greater than 4in 100mm Remove the outside retaining flange by hand if loose If tight depress the spindle lock button at the top of the gear box housing rotate the spindle to locate the lock position Once the spindle is locked and cannot be rotated use the wrench supplied to loosen the retaining flange Remove the grinding disc from its envelope Holding the angle grinder with the spindle facing upwa...

Page 4: ...se dangerous disc breakage or damage to the tool Do not use grinder for extended periods of time Vibration caused by operating this tool may cause damage to fingers hands and arms 1 When not in use the grinder should be stored in a dry frost free location not within the reach of children 2 Keep ventilation slots of the grinder clean at all times and prevent any foreign matter from entering 3 If th...

Reviews:

No comments