Installation and operating instruction
Oil burner WM-L20/2-A R (W-FM100/200)
7 Commissioning
83252902 1/2019-09 La
36-84
7.2 Adjusting the burner
In addition to this chapter, the installation and operating manual of the Combustion
Manager should be observed. This manual contains detailed information about:
menu structure and navigation,
parameter settings,
editing of points,
function, etc.
Prerequisite
Open oil shut off devices.
Switch on voltage supply.
1. Switch off burner
The ABE is in
OperationalStat
in the sub menu
NormalOperation
and dis-
plays current values.
Exit level using the [esc] key.
Select
ManualOperation
.
Select
Autom/Manual/Off
.
Set
Burner Off
.
The burner switches off.
Exit level using the [esc] key.
2. Enter password
Select
Param & Display
.
Select
Access with HE
(password for heating engineer).
Enter HE password using dial knob and confirm with [ENTER].
3. Check load limits
Select
RatioControl
.
Select
OilSettings
.
Select
LoadLimits
.
Select
MinLoadOil
and set
0.0%
.
Select
MaxLoadOil
and set
100%
.
Use [esc] key to return to the display
LoadLimits
.
4. Check ignition position
The setting of the oil quantity regulator in ignition position is pre-set when supplied
(see burner data sheet).
Select
SpecialPositions
.
Select
IgnitionPos
.
Select
IgnPosOil
(setting oil quantity regulator in ignition position).
Check
IgnPosOil
.
Use [esc] key to return to the display
IgnitionPos
.
