Installation and operating instructions
Fresh water station WHI freshaqua 44; Fresh water station WHI freshaqua 55
2 Safety
83514402
▪
1/2017-08
▪
Ext. PAW
6-36
NOTICE
Material damage due to mineral oils!
Mineral oil products cause permanent damage in the material,
resulting in its sealing characteristics getting lost.
We cannot be held liable for damage caused by seals thus
damaged, nor will we offer a replacement under warranty.
It is imperative to prevent the EPDM from making contact
with substances containing mineral oils.
Use a silicone- or polyalkylene-based lubricant free of
mineral oil such as Unisilikon L250L and Syntheso Glep 1
from Klüber or a silicone spray.
NOTICE
Malfunctions!
The fresh water station must be integrated into the
potential equalisation of the electrical installation.
If this is not ensured by the connected pipework then
establish a correct potential equalisation connection
to the main potential connection.
2.3
Safety measures
Immediately eliminate safety-relevant defects and replace safety-relevant components
when they have reached the end of their service life due to their construction.
2.4
Electrical connection
When performing any work on live parts:
Observe the accident prevention regulations BGV A3 and local regulations,
use tools according to EN 60900.
2.5
Structural modifications
Conversion measures are only allowed after prior approval in writing by the
Max Weishaupt GmbH.
Additional components may only be installed if they were not tested together
with the machine.
Use only Weishaupt original parts.
2.6
Disposal
Dispose of the materials used properly and in an environmentally compatible manner.
In doing so, observe local regulations.
