Scope of delivery:
4 x cylinder head screw with hexagon socket M8 x 16 mm, 4 x washer
1 x adjuster for table top, 8 x connecting sleeve M8 x 20 mm
16 x countersunk screw with hexagon socket M8 x 20 mm
2 x Allen key 5 mm
A S S E M B LY I N S T R U C T I O N S
L O F T T A B L E
Figure 1:
Place the table upside-down on a level surface. Screw the legs together as
shown and slightly tighten the screws. To do this, use:
4 x cylinder head screws with hexagon socket M8 x 16 mm, 4 washers.
Figure 2:
Now screw the adjuster for the table top into the center fixture.
2
1
