HYDRAU-FLO
®
Description
Document Number:
Revision: 0
CONTROLLED DOCUMENT
Copyright © 2015, Weir Minerals Australia Ltd. All rights reserved.
Page 3-23
Issue Date: 23 February 2015
3.5.4 Lever Float (Fixed) Connections
Lever floats are used as the actuator in stationary tanks using the fast filling process. These lever floats are also
suitable for providing over fill protection on remote/trickle feed systems.
NOTICE
For further information on the Lever Float Settings, refer to the appendices section of this
manual.
Table 3-10: Lever Float Extensions
Lever Float:
Stem Length:
Rated Pressure:
110mm
1.5 Bar
250mm
1.5 Bar
110mm
20 Bar
250mm
20 Bar