HYDRAU-FLO
®
Description
Document Number:
Revision: 0
CONTROLLED DOCUMENT
Copyright © 2015, Weir Minerals Australia Ltd. All rights reserved.
Page 3-15
Issue Date: 23 February 2015
3.3.4 Hydrau-Flo
®
Lever Float Control Valve
NOTICE
The lever control valve is typically used on stationary equipment including skid mounted pump
sets, generators and lighting plants. The simple and robust design provides a lower cost option
for stationary equipment and is available in two different lengths.
Table 3-4: Lever Float Control Valve
Lever Float Control
Valve (LFCV)
Description:
Reference Image:
Standard LFCV
HF1007Z0001
(110mm Stem)
HF1007Z0002
(250mm Stem)
1.5 bar Working
Pressure
(7/8” UNF
Mounting Stem)
Available for stationary equipment only, such
as; skid mounted pump sets, generators and
lighting plants.
Standard LFCV
HF1007Z0003
(110mm Stem)
HF1007Z0004
(250mm Stem)
20 bar Working
Pressure
(7/8” UNF
Mounting Stem)
Available for stationary equipment and only
for remote gravity filling from an auxiliary fuel
tank.
Swivel Lever LFCV
HF1007Z0005
(110mm Stem)
90 bar Working
Pressure
(7/8” UNF
Mounting Stem)
Available
for
mobile
and
stationary
equipment,
skid
mounted
pump
sets,
generators and lighting plants.
