© 2021 WEINZIERL ENGINEERING GmbH
Seite 7/20
5 Setting up a Wi-Fi connection
5.1 KNX IP Interface 740.1 wireless is
“Access point”
To set up a Wi-Fi connection from a PC or laptop, a Wi-Fi adapter is required. For laptops, this is
usually integrated in the device.
The Wi-Fi connection to the KNX IP Interface 740.1
wireless
is set up as follows:
First, the Wi-Fi provided by the KNX IP Interface 740.1
wireless
must be found. The Windows®
“Show available networks” dialog lists all available wireless networks. This dialog can be accessed
via
“Settings / Network & Internet / Show available networks”. Alternatively, this dialog can be
accessed via the corresponding
“Network” icon in the notification area at the edge of the screen.
Since the KNX IP Interface 740.1
wireless
has an integrated DHCP server, the IP address of the
PC should be set automatically (DHCP). This is the default setting for most laptops.
