cMT-SVR Startup Guide
V1.00
3
1.3.
Ethernet port
The unit has one 10/100/1000M Gigabit Ethernet port.
The LED indicators on the Ethernet port indicate:
Orange LED: LAN link status
Green LED: Active communication status
To connect Ethernet, please use a CAT-6 Ethernet cable.
1.4.
CR1225 battery
The cMT-iV5 requires a CR1225 coin type lithium battery to keep the RTC running.
Battery type: CR1225 3V lithium battery
1.5.
Power connection
Power:
The unit can be powered by DC power only, voltage range: 24
±
20% Volts DC, compatible
with most controller DC systems. The power conditioning circuitry inside the unit is accomplished
by a switching power supply. The peak starting current can be as high as 500mA.
Note:
Connect positive DC line to the
‘
+
’
terminal and the DC ground to the
‘
-
’
terminal.
1.6.
Requirements
1.
CloudHMI: Built-in app for connecting cMT-SVR.
2.
Supported HMI model: cMT-SVR.
3.
One cMT-iV5 can log in and operate three cMT-SVRs simultaneously.
