Weinmann MEDUCORE Standard2 Instructions For Use Manual Download Page 356

Page: 356 / 396

356

EN MEDUCORE

Standard

6840

021

15 Storage

15.3 Storing printer

15.4 Storing printer battery

1. If the printer is not being used for an extended period: Charge

printer battery

(see “4.7.1 Charging the printer battery”,

page 94)

2. Store the printer battery

separately

from the printer.

3. Charge the printer battery after no more than 12 months.

Result

The printer battery is stored in a dry place and ready for use.

Delayed therapy due to incorrect storage of the printer!

Storage outside the specified ambient conditions may lead to
printer malfunctions or damage the printer. This may delay the
patient’s therapy.



Always store the printer within the specified ambient
conditions.



In the event of problems with the printer: Carry out a function
check of the printer

(see “5.6 Carrying out a function check on

the printer (only with Printing option)”, page 117)

Summary of Contents for MEDUCORE Standard2













































































































































































































































































































































































































Search results

Summary of Contents for MEDUCORE Standard2

Reviews:

Weinmann MEDUCORE Standard2, Instructions For Use Manual, Page: 356 / 396

Search results

Summary of Contents for MEDUCORE Standard2

Reviews: