Weinmann Homecare MEDUCORE Easy, Service And Repair Instructions

Page: 27 / 48

Repair information and repair instructions 27
8.4 Opening the device
Danger of death! Danger of electric shock! If no discharg-
ing unit is available, work on the MEDUCORE Easy must
be carried out at a protected high-voltage workstation.
1. Take the red device lid
2
off.
2. Remove the pins
21
and springs
22
and store them
in a safe place.
3. Lie the MEDUCORE Easy with the upper
encasing
24 facing down
on a non-slip surface.
4. Carefully open the lower encasing device
25
.
5. Pull the loudspeaker cable from the printed circuit
board.
6. Pull the red cable plug out of the printed circuit
board.
7. Pull the capacitor out of the lower encasing part
and place it carefully on the main circuit board.
8. Pull the plug belonging to the pad cable
40
and
41
out of the printed circuit board.
9. Pull the blue and black cable plugs out of printed
circuit board.
10. Now you can set aside the lower encasing part
25
.
8.5 Exchange the device lids
Remove lid
1. Open the red device lid
2
.
2. Slide the pins
21
out to one side and remove
them.
3. Pull the springs
22
out and store them in a safe
place.
4. Take the device lid
2
off.
21
22
2
25
24
40
40
24
21
22
2