Weinmann ACCUVAC WM 15261, Description Of The Equipment And Instructions For Use, Page: 28 / 42

26
English
6.3 Reassembling
After cleaning, disinfection or sterilization,
reassemble the parts as follows:
1. Insert filter
3
in filter cover
2
. Make sure
that the filter is correctly seated in the
groove in the filter cover.
2. Press the ball
7
of the overfill system fully
into its housing in the secretion cover
6
.
3. Check the proper fit of bracing clip
4
.
4. Press sealing ring
8
into groove in secre-
tion cover
6
.
5. Fully insert filter cover
2
into secretion
cover
6
.
6. Place the secretion cover
6
on the collec-
tion canister
10
.
7. Fit the aspiration tube
12
.
8. Attach collection canister to appliance
case.