Weiler E2850, Operator And Maintenance Manual, Page: 86 / 268

1
WEILER E2850 REMIXING TRANSFER VEHICLE
3-30
Operating Instructions
3
Driving Machine
D
RIVING
M
ACHINE
Drive the machine at a speed suitable for the terrain. Avoid sudden starts, stops, or maneuvers.
Provide appropriate lighting and marking on the machine to meet jobsite requirements and
regulations.
1. Follow
"Machine Starting Procedure"
, page
3-6
.
2. Select a propel range with Propel 3-Speed Control
Switch (1) .
3. Move discharge conveyor to a position that will not
cause a collision with any objects in the path. Carry
elevator and discharge conveyor as low as possible.
4. Increase engine speed to full throttle (2).
5. Turn Park Brake (3) off.
WARNING
Runover possible. Contact with moving parts can cut or crush.
Make sure no one is working on, underneath, or close to machine before
starting engine or moving machine. Ensure area is free of personnel. Keep
spectators away.
WARNING
A rider can fall off and be crushed.
Never allow anyone to ride on the ladder or platform.
WARNING
Rollover possible. Death or serious injury can result if crushed under the
machine.
Be alert and use extreme caution when driving the machine on a hillside,
near ditches, gullies, holes, or obstructions where rollover could occur.
Never allow anyone to be on the downhill side of the machine.
1
3
2