Weiler E2850, Operator And Maintenance Manual, Page: 8 / 268

WEILER E2850 REMIXING TRANSFER VEHICLE
viii
Introduction
I
NTRODUCTION
Thoroughly read and understand these instructions and store the tethered manual in the manual
holder on the machine for future reference.
When purchasing a used Weiler machine you are requested to contact Weiler Customer Service at
www.weilerproducts.com and request a customer login and password to gain access to online
manuals for this machine.
Additional copies of the manuals are available from an authorized Weiler dealer. When ordering a
new manual, use the part number on the front cover.
I
NTENDED
U
SE
The E2850 Remixing Transfer Vehicle is used to transfer bulk asphalt paving material from delivery
vehicles to a paving machine. The machine receives paving material in the forward dump hopper, or
picks windrowed material up off of the roadway, delivers the material to the center hopper for
remixing, and then conveys the material to the hopper of a paving machine.
Always use the machine in accordance with the instructions contained in this
Operator's and
Maintenance Manual,
safety signs on the machine, and other material provided by Weiler. Usage in
any other way is considered contrary to the intended use.
Proper maintenance and repair are essential for safety and for efficient operation of the machine. Do
not use the machine if it is not in suitable operating condition.
This safety alert system identifies important safety messages in this
manual.
When you see this symbol, be alert, your safety is involved, carefully read
the message that follows, and inform other operators.