Weiler E2850, Operator And Maintenance Manual, Page: 7 / 268

WEILER E2850 REMIXING TRANSFER VEHICLE
vii
Foreword
F
OREWORD
This manual is an important part of the machine and provides correct procedures for machine
operation and maintenance. Proper maintenance and service are essential for safety and for efficient
operation of the machine. Do not use the machine if it is not in suitable operating condition. Read and
understand these instructions thoroughly before operating the machine for the first time or
maintaining machine. Failure to do so could result in personal injury or equipment damage. Contact
an authorized Weiler dealer if you do not understand the instructions in this manual or need
additional information.
This tethered manual must remain with the machine at all times. Store it in the manual box.
Replace manual immediately if lost, damaged, or unreadable. If you sell the machine, be sure this
manual is transferred to the new owner.
If a question arises concerning the equipment, contact an authorized Weiler dealer. Factory-trained
personnel and genuine replacement parts are available for all service requirements.
To maintain and help ensure trouble-free operation of this machine, the routine maintenance as
specified in this manual must be carried out at the recommended intervals.
The instructions, illustrations, and specifications in this manual are based on the latest information
available at time of publication. This machine may have product improvements and features not yet
contained in this manual. Dimensions and weights are approximate and the illustrations may not
show the equipment in standard configuration.
The following acronyms may be used throughout this manual: CAN - Controller Area Network, CW -
Clockwise, CCW - counterclockwise, DEF - Diesel Exhaust Fluid, DOC - Diesel Oxidation Catalyst,
DPF - Diesel Particulate Filter, ECM - Electronic Control Module, LCD - Liquid Crystal Display,
LED - Light Emitting Diode, PPE - Personal Protective Equipment, SMV - Slow Moving Vehicle, and
SCR - Selective Catalytic Reduction.
Make no modifications to machine unless specifically requested or authorized by Weiler. Modification
of this machine could mean that it will no longer meet applicable standards or regulations, and the
machine may not function properly or in accordance with these operating instructions. Machine
modification should only be performed and verified for operational and safety requirements by
competent personnel.
Weiler reserves the right to make changes at any time without notice or obligation.
This equipment may be covered by one or more U.S. patents listed at
www.weilerproducts.com/patents.