上
海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD.
38
/
47
4.4.6.
Set Workpiece Offset Compensation
In actual machining, if the machined workpiece is tilted to one side, setting
workpiece offset compensation is required.
To set workpiece offset compensation, do the following:
1.
Switch to
Craft
page and check
Setting ON
.
2.
Click
Set Part Offset Comp
.
Work Offset Compensation
dialog box pops up:
3.
Check
Enable Offset
to enable offset.
4.
Select compensation type:
–
Overall compensation
It is the common compensation type.
With
enabled, the set workpiece offset compensation is
suitable for all workpieces in the array.
