上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD.
49
/
61
2. Double-click the target
PhysicalAddress
field to specify a physical address
(controller and port) for the corresponding logical address.
8.3.5 Configure Dual Drive
Follow the steps below to configure dual drive axis:
1. In the left
Configuration
list, double-click
Distribute
to open the
Distribute
page
on the right:
2. Double-click the target
PhysicalAddress
field to specify a physical address
(controller and port) for the corresponding logical address.
8.3.6 Configure Dual Work Stations
If dual work stations are enabled, the system directly starts machining on work station 2
after machining on work station 1 is finished to save loading and unloading time and
improve efficiency.
Follow the steps below to configure dual work stations:
1. In the left
Configuration
list, double-click
DoubleArea
to open the
DoubleArea
page on the right:
2. Double-click the target
PhysicalAddress
field to specify a physical address
(controller and port) for the corresponding logical address.
8.3.7 Configure Press Wheel
Press wheels can be used to prevent plates from moving when being processed.
Follow the steps below to configure press wheels:
1. In the left
Configuration
list, double-click
PressWheel
to open the
PressWheel
page on the right:
2. Set the parameter
Number of Presswheel
.
