上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD.
43
/
61
2. Enter the old password and new password in the corresponding fields and click
Modify
.
7.4 Switching System Language
The software supports Chinese and English.
Follow the steps below to switch to English interface: In the menu bar, go to
System
>
Language
>
English
.
Restart the software.
7.5 Data Backup
The system supports backup of the parameter settings and log.
Follow the steps below to back up the data:
1. In the menu bar, go to
System
>
Data Backup
to open the
Save as
dialog box.
2. Select a storage path for the backup files and click
Save
.
7.6 Remote Assistance
You can use the remote assistance service to let your machining system remotely
controlled by technical support personnel to help troubleshoot.
Before using the remote assistance service, ensure that your computer is connected to the
Internet.
Follow the steps below to use the remote assistance service:
1. In the menu bar, go to
System
>
Remote Assistance
.
2. Give the computer identification code and the verification code to the technical
support staff for remote control.
7.7 Using NcGateway
NcGateway is a component of the WEIHONG NcCloud system. It provides data interfaces
and communication protocols for device Internet connection. You can use NcGateway to
manage devices.
In the menu bar, go to
System
>
NcCloud
to open the NcGateway window.
For details, see NcGateway manuals.
7.8 M Codes
You can use M codes to run pre-defined sub-programs.
Follow the steps below to check the currently available M codes:
In the menu bar, go to
System
>
M Instruction Table
:
