WEIHONG LS6000M, Manual

Page: 53 / 121

上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD
.
50 / 116

Real-time State Check

Manual Speed
4.3.1 System Setting
Includes the following parameters:

Axis Direction(Z)
o
Description: Specifies the direction for Z-axis mechanical coordinate
increments. Modify the parameter value if you find out during manual
operation that the axis movement direction is opposite to that determined by
the
right hand rule .
o
Range

1: positive direction.

-1: negative direction.
o
Value: 1

Pulse Equivalent
o
Description: The distance or angle change for each control pulse.
o
Range: 0.000001mm/p
–999mm/p
o
Value: 0.001mm/p

Upper Limit of Soft Limit
o
Description: Indicates the upper threshold of the soft limits.
o
Range: -1000 mm
–99999 mm
o
Value: 0

Lower Limit of Soft Limit
o
Description: Indicates the lower threshold of the soft limits.
o
Range: -99999 mm
–0 mm
o
Value: -1000

Screw Pitch
o
Description: Indicates the Z-axis screw pitch.
o
Range: 0 mm
–360 mm
o
Value: 10

Coarse Positioning Direction
o
Description: The axis movement direction during coarse positioning phase of
going to the mechanical origin.
o
Range

1: positive.

-1: negative.
o
Value: 1

Coarse Positioning Speed
o
Description: The axis feed rate during coarse positioning phase of going to
the mechanical origin.
o
Range: 0.1mm/min
–10000mm/min
o
Value: 1800

Retract Distance
o
Description: The axis additional moving distance after coarse positioning
phase. A positive value means inward movement and a negative value
means outward movement. 0 means no movement.
o
Range: -100mm
–1000mm
o
Value: 2
4.3.2 Follow Setting
Includes the following parameters: