Focal Level
It sets the height in Z-axis when the camera takes clear photos.
Pre-shoot delay
It sets the delay time to stabilize the camera before taking a photo.
Post-shoot delay
It sets the delay time after the camera takes a photo.
Shoot times
It sets how many times the camera takes photos at a shooting position.
4.
Click
Developer
on the left side, and set parameters of developer’s access on
the right.
•
Click
Snap image
button to take photos at current position.
•
It is recommended to check the box
Scaling
for
Three-point shooting
.
Setting CCD Working Plane
CCD working plane refers to the XY plane at focal height. To set the working plane is
to set the focal height in Z-axis.
Prerequisite
Well adjust focal length and aperture of the camera lens. See
camera lens
for details.
Steps
1.
Turn the system to
Manual
mode, Click
Vision
→
CCD
→
Parameters
→
Manufacturer Param
→
Measure
to switch to
Measure
interface.
WEIHONG ELECTRONIC TECHNOLOGY CO., LTD.
- 13 -
