WEIGL ProCommander 2, Instruction Manual

Page: 65 / 87

Control.ini
65
9 Control.ini
The Control.ini file is a new and easy way to assign different
input events to any of the available ASCII-commands without any
special show programming. It is even possible to assign an input
event to several successive commands. An input event may be a
change of the remote inputs, an infrared signal, a time event or a
variable change.
A level change of the remote inputs may be defined as
"close"-event (means activation of an input), "open"-event
(deactivation of an input) or "toggle"-event (every level change
at an input). With toggle, both the press and the release of a key
action will cause a trigger event. When a key on the infrared
remote is depressed, only close "c" is recognized.
The Control.ini file can be created with any text editor. After
completion, it should be copied into the main directory (root
directory) of the
microSD card.
During execution there is no complex syntax check.
Therefore, the programmer is responsible for correct command
syntax.
10.1 Structure of the Control.ini file
It must always start with the definition of the input event: