WEIGL ProCommander 2, Instruction Manual, Page: 37 / 87

Modification of the menu of ProCommander LTC
37
In the first line of the display "Set StPlyL:" appears, this
corresponds to the LEVEL 4 of the menu plan. The second line of
the display shows the current value and corresponds to LEVEL 5
of the menu plan. The * asterisk next to the value indicates that
it is currently active.
You can choose between the funcktions "ON" and "OFF".
Move the joystick up or down. If the desired function appears on
the display confirm the value by pressing Enter. Once the value is
saved, an * asterisk will be displayed.
By moving the joystick to the left, you can return to a parent
LEVEL.
RS485-2 Drv – LEVEL 3
With the function "RS485-2 Drv" you can define the driver for
the serial interface. For this purpose you have to activate
"RS485-2Drv" with Enter.
In the first line of the display "RS485-2 Drv:" appears, this
corresponds to the LEVEL 4 of the menu plan. The second line of
the display shows the current value and corresponds to LEVEL 5
of the menu plan. The * asterisk next to the value indicates that
it is currently active.
You can choose between the drivers "IAI", "Dynamixel",
"NanotcSCI47" and "None". You must move the joystick either
up or down. If the desired driver appears on the display confirm
the value by pressing Enter. Once the value is saved, an *
asterisk will be displayed.