45
Manual maxGUARD
2526740000/02/03.2018
7 Potential distribution terminals
| AMG MD... potential distribution terminal
7.3 AMG MD... potential distribution terminal
AMG MD...
1
Connection 1 (1.5 mm
2
)
2
Connection 2 (1.5 mm
2
)
3
Connection 3 (2.5 mm
2
)
4
Connection 4 (2.5 mm
2
)
5
MINUS output connection (cross-connector)
6
Marker
The AMG MD potential distribution terminal is used to repli
-
cate the MINUS output of the AMG ELM load monitors. The
potential is fed in exclusively from the MINUS output of the
load monitor via a cross-connector.
AMG MD... block diagram
7.4 AMG XMD... potential distribution terminal
AMG XMD...
1
Connection 1 (1.5 mm
2
)
2
Connection 2 (1.5 mm
2
)
3
Connection 3 (2.5 mm
2
)
4
Connection 4 (2.5 mm
2
)
5
GND main strand connection (0 V)
6
Marker
The AMG XMD potential distribution terminal is used to rep
-
licate the connections to the GND main strand. The potential
is fed in exclusively from the GND main strand via an internal
connection.
AMG XMD... block diagram
