User Manual Managed Switches
8
o
Access Control (port based via IEEE 802.1X)
o
Access Control List (IP based / MAC based)
o
Loop protection
o
Management access security via privilege level configuration for different user roles
3. Web Management
In this chapter, we explain how to access the Weidmüller Switch
’s through the Web console as well
as all the configuration, monitoring, and administration functions available when using this interface.
3.1 Accessing the Web interface via HTTP
The Ethernet Switch’s web browser interface provides a convenient way to modify the switch's
configuration and access the built-in monitoring and network administration functions. The
recommended web browser is Microsoft Internet Explorer 8.0 or higher with JVM (Java Virtual
Machine) installed.
NOTE:
To use the Switch's management and monitoring functions from a PC host
connected to the same LAN as the switch, you must make sure that the PC host and the
Switch are on the same logical subnet.
NOTE:
If the Weidmüller switch is configured for other VLAN settings, you must make
sure your PC host is on the management VLAN.
NOTE:
Before accessing the Switch’s web browser interface, first connect one of its
RJ45 Ethernet ports to your Ethernet LAN, or directly to your PC's Ethernet card (NIC).
You can establish a connection with either a straight-through or cross-over Ethernet
cable.
NOTE:
The Weidmüller switch’s default IP address is
192.168.1.110
.
The default username / password are
admin
/
Detmold
After making sure that the Weidmüller switch is connected to the same LAN and logical subnet as
your PC, open the switch’s web console as follows:
Open your web browser and type the Switch
’s IP address in the
Address
or
URL
field. Press
Enter
to establish the connection.