Setup and Network Configuration
16
1253240000/00/02.11
4.3
Using a web browser to access the device
After the FreeCon Active PROFINET-POF-Repeater has been configured using FreeCon CFG, the web
server hosted on the repeater can be accessed using the assigned IP address. Use a web browser installed
on a PC that is on the same subnet. The web interface can be used to manually display the device proper-
ties (firmware version, serial number and MAC address) or to change settings (IP, subnet mask or gateway
addresses).
Figure 10
Properties of the FreeCon Active PROFINET-POF-Repeater, as viewed in web browser
Figure 11
Using the web browser to configure the FreeCon Active PROFINET-POF-Repeater
