Weidmuller SAI Active Universal Pro Series, Manual

Page: 67 / 177

Connecting the SAI Distributor
5.9 SAI-AU M12 SB 8DO 2A
The SAI distributor Active Universal is equipped with
the functions of a decentralised I/O system. Each
distributor is equipped with module-specific actua-
tor/sensor functions and a Fieldbus interface. The
modules combine the complete electronics in a wa-
ter- and dust-proof protected housing. That enables
their use in harsh environments.
The module SAI-AU M12 SB 8DO 2A is designed to
connect 8 digital actuators. The outputs are de-
signed for a load current of 2.0 A.
The signals are connected via four M12 plug-in con-
nectors.
Figure 40 SAI-AU M12 SB 8DO 2A
HINWEIS
After a change of the Subbus modules is
in many situations a new start of the ga-
teway necessary.
LEDs
UB Supply voltage UB
Supply for the module and
the plug-in stations 1 though
4.
UQ1 Supply voltage UQ1
Supply for the outputs
O1...O4
UQ2 Supply voltage UQ2
Supply for the outputs
O5...O8
Com Communication with the
gateway
DO1 to DO8 Digital outputs
Connections
AUX IN Supply voltage UQ1, UQ2
SUB IN Sub-bus input
SUB OUT Sub-bus output
1 to 4 8 outputs
Table 45 SAI-AU M12 SB 8DO 2A
5663600000/1.4/09.09 67