Weidmuller Power Monitor 51A, Quick Manual, Page: 15 / 20

Configuring Power Monitor
1502950000/01/03.15 15
4. Configuring Power Monitor
Firstly, please change the protocol from MEWTOCOL to MODBUS in the Power Monitor and set communica-
tion parameters as follows:
•
Baud Rate: 19200
•
Parity: Odd
•
Data Bits: 8
•
Stop Bits: 1
Start the Weidmüller Power Monitor Manager.
Under [Settings] select [Communication setup].
STEP 27
STEP 26