Weidmuller IE-WL-BL-AP-CL User Manual Download Page 44 | Manualshive

Page: 44 / 76

background image

Wi-Fi device IE-WL-BL-AP-CL

Web Console Configuration

3-44

AeroLink protection state

The AeroLink protection state changes.
AeroLink states: Initialize (init)/ Discovery/ Idle/ Negotiation
(nego)/ Back up/ Active/ Changed/ Undefined (undef)

Configuration-related events

Event is triggered when…

Configuration Changed

A configuration item has been changed.

Configuration file import via Web Console The configuration file is imported to the IE-WL-BL-AP-CL.
Console authentication failure

An incorrect password is entered.

Firmware upgraded

The device

’s firmware is updated.

Loaded the configuration from
EBR-MODULE RS232

The configuration is successfully loaded/there is an error loading
the configuration from EBR-MODULE RS232.

Saving configuration to EBR-MODULE
RS232

The configuration is successfully saved/there is an error saving the
configuration to EBR-MODULE RS232.

EBR-MODULE RS232 failure

IE-WL-BL-AP-CL cannot detect an EBR-MODULE RS232 at the
console port.

Configuration reset to default

The configuration is reset to factory default.

Power events

Event is triggered when…

Power 1/2 transition (On -> Off)

The IE-WL-BL-AP-CL is powered down in PWR1/2.

PoE transition (On -> Off)

The IE-WL-BL-AP-CL is powered down in PoE.

Power 1/2 transition (Off -> On)

The IE-WL-BL-AP-CL is powered via PWR1/2.

PoE transition (Off -> On)

The IE-WL-BL-AP-CL is powered via PoE.

Syslog

This function provides the event logs for the Syslog server. The function supports up to three configurable
Syslog servers and Syslog server UDP port numbers. When an event occurs, the event will be sent as a Syslog
UDP packet to the specified Syslog servers.

Syslog Event Types

The event type groups are shown on this page. Select the

Enable Logging

checkbox next to the event type to

enable logging of the event. By default, all event types are enabled (checked).

Syslog Server Settings

You can configure the parameters for your Syslog servers in this page.

«
...
42
43
44
45
46
...
»

Summary of Contents for IE-WL-BL-AP-CL













































































Reviews:

No comments

Related manuals for IE-WL-BL-AP-CL

Brand: H3C Pages: 42

Brand: Fortinet Pages: 31

Brand: Planet Pages: 29

Brand: CNET Pages: 2

Brand: Ekselans Pages: 25

Brand: Arista Pages: 14

MAX-STREAM EA9350

Brand: Linksys Pages: 45

Brand: Accton Technology Pages: 34

Brand: Accton Technology Pages: 42

Brand: 4IPNET Pages: 17

Brand: 4IPNET Pages: 48

Brand: AmbiCom Pages: 82

Brand: UAT Pages: 24

Brand: Novatel Pages: 96

Overdrive Pro 3G

Brand: Sierra Wireless Pages: 174

Brand: TECOM Pages: 18

Brand: TECOM Pages: 16

SVR200 - One Wireless-G ADSL/EN Services Router Wireless

Brand: Linksys Pages: 3

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands