background image

4

Top Frame

High Pulley

Lat Tower

Backrest

Storage Knob

Upright

Low Pulley 

Base Plate

Leg Lever 

Seat Knob

Seat

Foot Plate

Resistance

Bars

“U”-Channel

BEFORE YOU BEGIN

Thank you for selecting the innovative MAX by WEI-
DER

®

ULTRA resistance system. The resistance system

offers a selection of stations designed to develop every
major muscle group of the body. Whether your goal is to
tone your body, build dramatic muscle size and
strength, or improve your cardiovascular system, the
resistance system will help you to achieve the specific
results you want.     

For your benefit, read this manual carefully before
using the resistance system. 

If you have questions

after reading this manual, see the front cover of this

manual. To help us assist you, please note the product
model number and serial number before calling. The
model number is WESY39242. The serial number can
be found on a decal attached to the resistance system
(see the front cover of this manual).

To avoid a registration fee for any service needed
under warranty, you must register the resistance
system at www.weiderservice.com/registration.

Before reading further, please review the drawing below
and familiarize yourself with the parts that are labeled.

ASSEMBLED DIMENSIONS: 
Height: 82 in. /

208 cm

Width: 64 in. /

163 cm

Depth: 80 in. /

203 cm

Summary of Contents for MAX Ultra

























Reviews: